TPS2212IDBG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 160mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2212 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Parallel |
| Current - Output (Max) | 250mA |
| Number of Ports | 1 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:2 |
| Voltage - Load | 3.3V 5V 12V |
| Min Current Limit | 300mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 160m Ω |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2212IDBG4 Overview
Tube is how it's packaged.This file is included in package 16-SSOP (0.209, 5.30mm Width).The lighting driver has the mounting type Surface Mount.PCMCIA Switch is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.As a default, the output is set to 2.It uses a supply voltage of Not Required to operate.It is equipped with Status Flag features.As you can see, it comes from the TPS2212 family.It has a total of 16 terminations.16 pins are used for operation.The LED driving board has a total of 1 functions.The lighting driver's maximum output is 250mAV.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.The LED driving board is equipped with a total of 16 pins.160mOhm resistance is present in the lighting driver.A normal operation requires that the supply voltage (Vsup) remain above 3V.
TPS2212IDBG4 Features
Supplied from 3.3V
Resistance of 160mOhm
TPS2212IDBG4 Applications
There are a lot of Texas Instruments TPS2212IDBG4 Power Switches ICs applications.
- Storage Drives
- PDAs
- Portable Video Game Players
- Storage (HDDs, SSDs)
- HDD, SSD
- Hot Swap
- Wireless Modem Data Cards
- Hot-Swap Systems
- Wireless/Networking Cards
- Portable GPS Device
