TPS2216ADAPRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-PowerTSSOP (0.240, 6.10mm Width) |
| Number of Pins | 32 |
| Weight | 181.096754mg |
| Operating Temperature | -40°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO REQUIRES 5V AND 12V SUPPLY |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2216 |
| Pin Count | 32 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 750mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 140m Ω |
| Height Seated (Max) | 1.2mm |
| Length | 11mm |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2216ADAPRG4 Overview
Tape & Reel (TR) is how it's packaged.It is included in the package 32-PowerTSSOP (0.240, 6.10mm Width).The mounting type of the LED driver is Surface Mount.It owns PCMCIA Switch switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~70°C TA.The LED driver has a total of 4 outputs.A voltage of Not Required is used to power it.A lighting driver with Status Flag features is available.It is part of the TPS2216 family of LED drivers.A total of 32 terminations have been recorded.In order to operate, the 32 pins are used.It contains 1 functions.The LED driver output is limited to 750mAV.High efficiency is possible at 3.3V supply voltage.It is mounted in the way of Surface Mount.In total, it has 32 pins.The LED driver is packaged in an econtainer with a capacity of Power Management Circuits.The maximum supply voltage for this lighting driver is set to 5.25V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 2.7V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.There are a total of 3 channels to choose from.The power supply of the part is 3.3/5V.The LED driver can also be used to produce ALSO REQUIRES 5V AND 12V SUPPLY.
TPS2216ADAPRG4 Features
Supplied from 3.3V
3 channels
Additional features like ALSO REQUIRES 5V AND 12V SUPPLY
TPS2216ADAPRG4 Applications
There are a lot of Texas Instruments TPS2216ADAPRG4 Power Switches ICs applications.
- PC Card Hot Swap
- USB Power Distribution
- Wearable Devices
- Set-top-box
- Hard Disk Drives
- Hot Swaps
- HDD and SSD
- Mobile Communication Devices
- Low Voltage I/O System Power
- Gaming
