Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
30-SSOP (0.209, 5.30mm Width) |
Surface Mount |
YES |
Number of Pins |
30 |
Weight |
217.61094mg |
Operating Temperature |
-40°C~70°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
30 |
ECCN Code |
EAR99 |
Resistance |
60mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Power Management Circuits |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Base Part Number |
TPS2216 |
Pin Count |
30 |
Number of Outputs |
4 |
Max Output Current |
750mA |
Power Supplies |
3.3/5V |
Number of Channels |
3 |
Interface |
Serial |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Number of Ports |
2 |
Nominal Supply Current |
150μA |
Output Configuration |
High Side |
Power Dissipation |
1.095W |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Switch Type |
PCMCIA Switch |
Nominal Input Voltage |
13.5V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
3.3V 5V 12V |
Fault Protection |
Current Limiting (Fixed), Over Temperature |
Rds On (Typ) |
140m Ω |
Drain to Source Resistance |
60mOhm |
Height |
2mm |
Length |
10.2mm |
Width |
5.3mm |
Thickness |
1.95mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2216ADB Overview
The LED driver's packaged as a Tube.This file is included in package 30-SSOP (0.209, 5.30mm Width).It has been mounted as Surface Mount on the LED driver.PCMCIA Switch is the type of switch owned by it.The temperature should be set to -40°C~70°C TA to ensure reliable functioning.There are 4 outputs available on this lighting driver.The LED driving board is powered by a voltage of Not Required.Status Flag features are available on the lighting driver.It is part of the TPS2216 family of LED drivers.It contains 30 terminations.The 30 pins are used to operate the LED driver.It is important to note that the LED driving board has 1 functions.The maximum output current must drop to 750mA to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 3.3V.It is equipped with a total of 30 pins.In this case, there is 60mOhm resistance in the LED driving board.A self-contained LED driver with a capacity of Power Management Circuits is contained in an econtainer.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 3 channels.In this case, the power supply is 3.3/5V.
TPS2216ADB Features
Supplied from 3.3V
Resistance of 60mOhm
3 channels
TPS2216ADB Applications
There are a lot of Texas Instruments TPS2216ADB Power Switches ICs applications.
- PC Cards
- Wireless Modem Data Cards
- Gaming
- Notebook PC
- PC Card Hot Swap
- Solid-State Drives
- HDD, SSD
- Set-top-box
- Set-Top Boxes
- Handheld Devices