Parameters |
ECCN Code |
EAR99 |
Resistance |
60mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
ALSO REQUIRES 5V AND 12V SUPPLY |
Subcategory |
Power Management Circuits |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Base Part Number |
TPS2216 |
Pin Count |
32 |
Number of Outputs |
4 |
Supply Voltage-Max (Vsup) |
5.25V |
Power Supplies |
3.35V |
Supply Voltage-Min (Vsup) |
2.7V |
Number of Channels |
3 |
Interface |
Serial |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Current - Output (Max) |
1A |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Switch Type |
PCMCIA Switch |
Nominal Input Voltage |
13.5V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
3.3V 5V 12V |
Fault Protection |
Current Limiting (Fixed), Over Temperature |
Rds On (Typ) |
60m Ω |
Height Seated (Max) |
1.2mm |
Length |
11mm |
Width |
6.1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
32-PowerTSSOP (0.240, 6.10mm Width) |
Number of Pins |
32 |
Weight |
181.096754mg |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
32 |
TPS2216DAPR Overview
Tape & Reel (TR) is the way it's packaged.There is a 32-PowerTSSOP (0.240, 6.10mm Width) package that includes it.Surface Mount is the mounting type of the LED driver.PCMCIA Switch is the switch type it owns.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.The lighting driver is equipped with 4 outputs that can be used.With a supply voltage of Not Required, the LED driving board operates.As far as features are concerned, the LED driving board has Status Flag.It belongs to the TPS2216 family.It contains 32 terminations.The operation is carried out using the 32 pins.There are 2 functions of the LED driver.The maximum output of the LED driving board is 1AV.Using a voltage of 3.3V allows for high efficiency.Surface Mount is mounted in the way.This LED driver is equipped with a total of 32 pins.There is 60mOhm resistance on the LED driver.A self-contained LED driver with a capacity of Power Management Circuits is contained in an econtainer.The maximum supply voltage is set to 5.25V.For normal operation, the supply voltage (Vsup) must be kept above 2.7V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.There are a total of 3 available channels.There is a voltage supply of 3.35V volts on this part.As a result of using this lighting driver, ALSO REQUIRES 5V AND 12V SUPPLY can also be produced.
TPS2216DAPR Features
Supplied from 3.3V
Resistance of 60mOhm
3 channels
Additional features like ALSO REQUIRES 5V AND 12V SUPPLY
TPS2216DAPR Applications
There are a lot of Texas Instruments TPS2216DAPR Power Switches ICs applications.
- HDD and SSD
- Hot Swaps
- USB Power Distribution
- Set-Top Boxes
- USB Ports/Hubs
- Hot-Swap Systems
- HDD, SSD
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
- PDAs