TPS2220ADBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2220 |
| Pin Count | 24 |
| Number of Outputs | 3 |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 1 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3.3V 5V 12V |
| Min Current Limit | 1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2220ADBR Overview
Tape & Reel (TR) is the way it's packaged.It is included with the 24-SSOP (0.209, 5.30mm Width) package as well.In this case, the LED driving board is mounted as Surface Mount.PCMCIA Switch is the switch type that it owns.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver has 3 outputs.A voltage of Not Required is used to power it.This LED driving board is equipped with Status Flag features in order for it to be useful.It is a member of the TPS2220 family.A total of 24 terminations have been recorded.The operation is carried out using the 24 pins.Currently, there are 1 functions associated with the lighting driver.Using a voltage of 3.3V allows for high efficiency.As a result, it has a total of 24 pins.Currently, the LED driving board has a resistance of 85mOhm ohms.The LED driver is packaged in an econtainer with a capacity of Power Management Circuits.Normal operation requires Vsup above 3V.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.A total of 3 channels are available for you to choose from.POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING can also be produced by using this LED driver.
TPS2220ADBR Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING
TPS2220ADBR Applications
There are a lot of Texas Instruments TPS2220ADBR Power Switches ICs applications.
- Storage Drives
- Hot Swap
- Wearable Devices
- Gaming
- Wireless Modem Data Cards
- USB Protection
- PC Card Hot Swap
- Handheld Devices
- PDAs
- Solid State Drivers
