TPS2220APWPR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2220 |
| Pin Count | 24 |
| Number of Outputs | 3 |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Number of Ports | 1 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 1.15mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2220APWPR Overview
It is package in Tape & Reel (TR) case.It is included in the package 24-TSSOP (0.173, 4.40mm Width) Exposed Pad.Mounting type Surface Mount is selected for the LED driving board.There is a PCMCIA Switch switch type associated with it.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.There is a default setting of 3 for output.Operation is based on Not Required supply voltage.A lighting driver with Status Flag features is available.The TPS2220 family consists of this type.The termination count is 24.It is necessary to use the 24 pins in order to operate the LED driver.As far as functions are concerned, the lighting driver has 1.In this case, the LED driving board can produce only 1AV as its maximum output.High efficiency is possible at 3.3V supply voltage.Surface Mount is mounted in the way.A total of 24 pins are included in this LED driver.It has a resistance of 85mOhm.The LED driver is packaged in an econtainer with a capacity of Power Management Circuits.Normal operation requires a voltage above 3V for the supply voltage.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.We offer 3 channels in total.In addition, POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING can be produced using this LED driving board.
TPS2220APWPR Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING
TPS2220APWPR Applications
There are a lot of Texas Instruments TPS2220APWPR Power Switches ICs applications.
- Portable GPS Device
- Wireless/Networking Cards
- Portable Video Game Players
- Smart Phones, Feature Phones
- Wireless Modem Data Cards
- Solid State Drivers
- Set-top-box
- Gaming
- Hard Disk Drives
- Telecom and Network Systems
