TPS2220APWPRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2220 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Number of Ports | 1 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 1.15mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2220APWPRG4 Overview
It is package in Tape & Reel (TR) case.This package is included in 24-TSSOP (0.173, 4.40mm Width) Exposed Pad.This LED driving board is mounted using the mounting type Surface Mount.PCMCIA Switch is the type of switch owned by it.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.There is a default setting of 2 for output.In order to operate, it requires a voltage supply of Not Required.As far as features are concerned, the LED driving board has Status Flag.The TPS2220 family consists of this type.As a result, there are 24 terminations.24 pins are used for operation.It consists of 1 functions.In this case, the LED driving board can produce only 1AV as its maximum output.With a supply voltage of 3.3V, high efficiency is possible.As a result, it is mounted in the manner of Surface Mount.A total of 24 pins are included in this LED driver.It has 85mOhm resistance.There is a Power Management Circuits capacity container for this LED driver that is self-contained.The maximum supply voltage is set to 3.6V.For normal operation, the supply voltage (Vsup) should be kept above 3V.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 3 channels to choose from.This LED driver can also produce POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING.
TPS2220APWPRG4 Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING
TPS2220APWPRG4 Applications
There are a lot of Texas Instruments TPS2220APWPRG4 Power Switches ICs applications.
- USB3.1 Power Delivery
- Hot Swaps
- Hot-Swap Systems
- HDD, SSD
- Wireless/Networking Cards
- Hot Swap
- Portable Devices
- Portable Music Players
- Set-top-box
- PC Card Hot Swap
