TPS2220BDBR
| Parameters | |
|---|---|
| Min Current Limit | 1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 1.95mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2220 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 1 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 4:2 |
| Voltage - Load | 3.3V 5V 12V |
TPS2220BDBR Overview
The LED driver's packaged as a Tape & Reel (TR).The 24-SSOP (0.209, 5.30mm Width) package includes it.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of PCMCIA Switch.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.There are 2 outputs available on this lighting driver.The LED driving board operates with a supply voltage of Not Required.In terms of features, the LED driving board has Status Flag.It is part of the TPS2220 family of LED drivers.It contains 24 terminations.The operation is performed through the 24 pins.It contains 1 functions.In order to meet the operation criteria, the maximum output current drops to 1A.Supply voltages of 3.3V allow for high efficiency.In total, it has 24 pins.Currently, the LED driving board has 85mOhm resistance.A container with a capacity of Power Management Circuits contains this self-contained lighting driver.The LED driver is configured with a maximum supply voltage of 3.6V (Vsup).The supply voltage (Vsup) should be kept above 3V for normal operation.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.In total, 1 channels are available.
TPS2220BDBR Features
Supplied from 3.3V
Resistance of 85mOhm
1 channels
TPS2220BDBR Applications
There are a lot of Texas Instruments TPS2220BDBR Power Switches ICs applications.
- Telecom and Network Systems
- Low Voltage I/O System Power
- Hard Disk Drives
- Set-top-box
- PDAs
- Mobile Communication Devices
- Various applications equipped with buttons
- HDD, SSD
- Solid State Drivers
- Portable/Handheld Devices
