TPS2220BPWP
| Parameters | |
|---|---|
| Weight | 98.08935mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2220 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 4:2 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 1.15mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
TPS2220BPWP Overview
It is package in Tube case.It is included in the package 24-TSSOP (0.173, 4.40mm Width) Exposed Pad.The lighting driver has the mounting type Surface Mount.There is a PCMCIA Switch switch type associated with it.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The lighting driver is equipped with 2 outputs that can be used.In order to operate, it requires a voltage supply of Not Required.As far as features are concerned, the LED driving board has Status Flag.The TPS2220 family contains this object.It contains 24 terminations.During operation, the 24 pins are used.Currently, the lighting driver has a total of 1 functions.From the lighting driver, there is a maximum output of 1AV.A supply voltage of 3.3V leads to high efficiency.Surface Mount is mounted in the way of this LED driving board.As a result, it has a total of 24 pins.It has a resistance of 85mOhm.This LED driver is self-contained in an econtainer with a capacity of Power Management Circuits.The Vsup value (maximum supply voltage) is set to 3.6V.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 3V.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.We currently have 1 channels available.
TPS2220BPWP Features
Supplied from 3.3V
Resistance of 85mOhm
1 channels
TPS2220BPWP Applications
There are a lot of Texas Instruments TPS2220BPWP Power Switches ICs applications.
- Wearable Devices
- Wireless/Networking Cards
- USB3.1 Power Delivery
- Hot-Swap Systems
- Telecom and Network Systems
- HDD and SSD
- Hard Disk Drives
- PC Cards
- Solid-State Drives
- USB Power Distribution
