TPS2220BPWPR
| Parameters | |
|---|---|
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2220 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 1 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 4:2 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 1.15mm |
| Length | 7.8mm |
TPS2220BPWPR Overview
A Tape & Reel (TR) is used to package it.There is a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package that includes it.Mounting type Surface Mount is selected for the LED driving board.This switch is of type PCMCIA Switch.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.It is possible to use 2 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.It has a total of Status Flag features.It is part of the TPS2220 family of LED drivers.The termination count is 24.The 24 pins are used to operate the LED driver.It is important to note that the LED driving board has 1 functions.To meet the operation criteria, the maximum output current drops to 1A.The supply voltage can be 3.3V for high efficiency.The lighting driver is mounted in the direction of Surface Mount.A total of 24 pins are present on it.In this LED driving board, there is 85mOhm resistance.A container with a capacity of Power Management Circuits contains this self-contained lighting driver.This LED driver is configured to have a maximum supply voltage of 3.6V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 3V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.
TPS2220BPWPR Features
Supplied from 3.3V
Resistance of 85mOhm
1 channels
TPS2220BPWPR Applications
There are a lot of Texas Instruments TPS2220BPWPR Power Switches ICs applications.
- Portable/Handheld Devices
- Hot Swaps
- Portable Devices
- USB Power Distribution
- Mobile Communication Devices
- USB Power Distribution
- Low Voltage I/O System Power
- Solid-State Drives
- USB Protection
- Portable GPS Device
