TPS2221PWP
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 72mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2221 |
| Pin Count | 14 |
| Number of Outputs | 2 |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Parallel |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 1 |
| Nominal Supply Current | 64μA |
| Output Configuration | High Side |
| Power Dissipation | 26.67mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 3:2 |
| Voltage - Load | 1.8V 3.3V 5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 97m Ω |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
TPS2221PWP Overview
A Tube is used to package it.This file is included in package 14-PowerTSSOP (0.173, 4.40mm Width).The lighting driver has the mounting type Surface Mount.It owns the PCMCIA Switch switch type.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The LED driver has 2 outputs.A voltage of Not Required is used to power it.This LED driving board is equipped with Status Flag features in order for it to be useful.It is a member of the TPS2221 family.It has a total of 14 terminations.14 pins are used for operation.As far as the lighting driver is concerned, there are 1 functions.In order to meet the operation criteria, the maximum output current drops to 1A.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.The LED driving board is equipped with a total of 14 pins.The LED driver has 72mOhm resistance.A self-contained LED driver with a capacity of Power Management Circuits is contained in an econtainer.The lighting driver is configured to have a maximum supply voltage of 3.6V (Vsup).Normal operation requires a voltage above 3V for the supply voltage.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.In total, there are 3 channels available.
TPS2221PWP Features
Supplied from 3.3V
Resistance of 72mOhm
3 channels
TPS2221PWP Applications
There are a lot of Texas Instruments TPS2221PWP Power Switches ICs applications.
- HDD and SSD
- HDD, SSD
- Mobile Communication Devices
- Low Voltage I/O System Power
- Storage (HDDs, SSDs)
- Telecom and Network Systems
- Portable GPS
- PC Card Hot Swap
- Handheld Devices
- Wireless/Networking Cards
