TPS2223ADB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2223 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Output Voltage | 6V |
| Max Output Current | 1A |
| Power Supplies | 3.35V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 2 |
| Nominal Supply Current | 140μA |
| Output Configuration | High Side |
| Power Dissipation | 890mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V |
| Min Current Limit | 1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2223ADB Overview
It is packaged in the form of a Tube.The 24-SSOP (0.209, 5.30mm Width) package includes it.This lighting drivere has a mounting type of Surface Mount.PCMCIA Switch is the switch type it owns.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The LED driver is equipped with 4 outputs.In order to operate, it requires a voltage supply of Not Required.It has a total of Status Flag features.It comes under the family of TPS2223.A total of 24 terminations have been found in it.The operation is carried out using the 24 pins.As far as the lighting driver is concerned, there are 1 functions.In order to meet the operation criteria, the maximum output current drops to 1A.High efficiency is possible at 3.3V supply voltage.A total of 24 pins are included in this LED driver.It has 85mOhm resistance.A self-contained econtainer holding Power Management Circuits capacity contains this lighting driver.In order to operate normally, the supply voltage (Vsup) must remain above 3V.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.A total of 3 channels are available for you to choose from.There is a voltage supply of 3.35V volts on this part.In addition, POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING can be produced using this LED driving board.
TPS2223ADB Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING
TPS2223ADB Applications
There are a lot of Texas Instruments TPS2223ADB Power Switches ICs applications.
- Notebook PC
- Portable Music Players
- Portable Video Game Players
- Set-top-box
- Handheld Devices
- Portable GPS
- Portable/Handheld Devices
- USB Power Distribution
- Storage (HDDs, SSDs)
- HDD, SSD
