TPS2223ADBG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2223 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.35V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 2 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V |
| Min Current Limit | 1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2223ADBG4 Overview
It is package in Tube case.It is included with the 24-SSOP (0.209, 5.30mm Width) package as well.The LED driver is mounted as Surface Mount.There is a switch type of PCMCIA Switch.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.By default, it is set to output 4.With a supply voltage of Not Required, the LED driving board operates.This LED driving board is equipped with Status Flag features in order for it to be useful.It comes under the family of TPS2223.It contains 24 terminations.During operation, the 24 pins are used.It contains 1 functions.High efficiency is possible when the supply voltage is set to 3.3V.A total of 24 pins are included in this LED driver.Currently, the LED driving board has a resistance of 85mOhm ohms.It is self-contained in an econtainer with a capacity of Power Management Circuits.In this LED driver, the maximum supply voltage is configured to be 3.6V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 3V.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.We currently have 3 channels available.This part is powered by 3.35V.With this LED driver, POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING can also be produced.
TPS2223ADBG4 Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING
TPS2223ADBG4 Applications
There are a lot of Texas Instruments TPS2223ADBG4 Power Switches ICs applications.
- Notebook PC
- PC Card Hot Swap
- Wireless/Networking Cards
- Gaming
- Hard Disk Drives
- HDD, SSD
- Wireless Modem Data Cards
- Handheld Devices
- Hot-Swap Systems
- USB Power Distribution
