TPS2223ADBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2223 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.35V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 2 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V |
| Min Current Limit | 1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2223ADBR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the 24-SSOP (0.209, 5.30mm Width) package as well.It has been mounted as Surface Mount on the LED driver.There is a PCMCIA Switch switch type associated with it.To ensure reliable operation, set the temperature to -40°C~85°C TA.The LED driver has 4 outputs.A supply voltage of Not Required is required for it to operate.A lighting driver with Status Flag features is available.As you can see, it comes from the TPS2223 family.It consists of 24 terminations in total.For operation, we use the 24 pins.It consists of 1 functions.It is necessary to reduce the maximum output current to 1A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.A total of 24 pins are included in this LED driver.It has 85mOhm resistance.Self-contained LED driver with Power Management Circuits capacity in an econtainer.Vsup (maximum supply voltage) is set to 3.6V.For normal operation, the supply voltage (Vsup) should be kept above 3V.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.We offer 3 channels in total.This part is powered by 3.35V.The LED driver can also be used to produce POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING.
TPS2223ADBR Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING
TPS2223ADBR Applications
There are a lot of Texas Instruments TPS2223ADBR Power Switches ICs applications.
- Wireless Headsets
- Hot Swap
- Low Voltage I/O System Power
- USB Power Distribution
- Solid State Drivers
- Smart Phones, Feature Phones
- Various applications equipped with buttons
- USB Ports/Hubs
- Portable Video Game Players
- Telecom and Network Systems
