TPS2223APWP
| Parameters | |
|---|---|
| Number of Ports | 2 |
| Nominal Supply Current | 140μA |
| Output Configuration | High Side |
| Power Dissipation | 3.322W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2223 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Output Voltage | 6V |
| Max Output Current | 1A |
| Power Supplies | 3.35V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
TPS2223APWP Overview
It is package in Tube case.Package 24-TSSOP (0.173, 4.40mm Width) Exposed Pad contains it.It has been mounted as Surface Mount on the LED driver.PCMCIA Switch is the switch type that it owns.Keeping the temperature at -40°C~85°C TA ensures reliable operation.By default, it is set to output 4.The LED driving board operates with a supply voltage of Not Required.The lighting driver has Status Flag features.It belongs to the family TPS2223.A total of 24 terminations can be found in it.The 24 pins are used for the operation of the system.It contains 1 functions.The maximum output current must drop to 1A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.It is positioned in the direction of Surface Mount.The LED driving board is equipped with a total of 24 pins.Currently, the LED driving board has a resistance of 85mOhm ohms.The LED driver is packaged in an econtainer with a capacity of Power Management Circuits.In order to operate normally, the supply voltage (Vsup) must remain above 3V.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.We offer 1 channels in total.3.35V is the power supply of the part.With the help of this lighting driver, POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING can also be produced.
TPS2223APWP Features
Supplied from 3.3V
Resistance of 85mOhm
1 channels
Additional features like POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING
TPS2223APWP Applications
There are a lot of Texas Instruments TPS2223APWP Power Switches ICs applications.
- HDD and SSD
- Storage (HDDs, SSDs)
- Notebook and Tablet Computers
- USB Protection
- Hard Disk Drives
- Storage Drives
- Various applications equipped with buttons
- Solid State Drivers
- USB3.1 Power Delivery
- Handheld Devices
