Parameters |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
24-SSOP (0.209, 5.30mm Width) |
Surface Mount |
YES |
Number of Pins |
24 |
Weight |
172.39345mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Resistance |
85mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
BREAK-BEFORE-MAKE SWITCHING |
Subcategory |
Power Management Circuits |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Base Part Number |
TPS2223 |
Pin Count |
24 |
Number of Outputs |
4 |
Max Output Current |
1A |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
3.35V |
Supply Voltage-Min (Vsup) |
3V |
Number of Channels |
3 |
Interface |
Serial |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Number of Ports |
2 |
Nominal Supply Current |
140μA |
Output Configuration |
High Side |
Power Dissipation |
890mW |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Switch Type |
PCMCIA Switch |
Nominal Input Voltage |
13.5V |
Ratio - Input:Output |
3:4 |
Voltage - Load |
3.3V 5V |
Min Current Limit |
1A |
Fault Protection |
Current Limiting (Fixed), Over Temperature |
Rds On (Typ) |
95m Ω |
Height |
2mm |
Length |
8.2mm |
Width |
5.3mm |
Thickness |
1.95mm |
Radiation Hardening |
No |
TPS2223DB Overview
It is packaged in the manner of a Tube.Package 24-SSOP (0.209, 5.30mm Width) contains it.This lighting drivere has a mounting type of Surface Mount.This switch is of type PCMCIA Switch.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.The LED driver has 4 outputs.A supply voltage of Not Required is required for it to operate.Status Flag features are available on the lighting driver.I believe it belongs to the TPS2223 family.It contains 24 terminations.The operation is carried out using the 24 pins.The LED driver has 1 functions.As a result, the maximum output current is reduced to 1A in order to meet the operation requirements.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.24 pins are equipped with it.In this LED driving board, there is 85mOhm resistance.A self-contained econtainer holding Power Management Circuits capacity contains this lighting driver.This LED driver is configured to have a maximum supply voltage of 3.6V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 3V.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 3 channels.A 3.35V power supply is used by the part.With the help of this lighting driver, BREAK-BEFORE-MAKE SWITCHING can also be produced.
TPS2223DB Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like BREAK-BEFORE-MAKE SWITCHING
TPS2223DB Applications
There are a lot of Texas Instruments TPS2223DB Power Switches ICs applications.
- PC Card Hot Swap
- Notebook and Tablet Computers
- Hot Swaps
- Hot-Swap Systems
- Solid State Drivers
- PDAs
- Hard Disk Drives
- Various applications equipped with buttons
- HDD, SSD
- Smart Phones, Feature Phones