banner_page

TPS2223DBG4

3.35V 0.65mm PMIC TPS2223 24 Pin 3.3V 24-SSOP (0.209, 5.30mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2223DBG4
  • Package: 24-SSOP (0.209, 5.30mm Width)
  • Datasheet: -
  • Stock: 107
  • Description: 3.35V 0.65mm PMIC TPS2223 24 Pin 3.3V 24-SSOP (0.209, 5.30mm Width) (Kg)

Details

Tags

Parameters
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Base Part Number TPS2223
Pin Count 24
Number of Outputs 4
Supply Voltage-Max (Vsup) 3.6V
Power Supplies 3.35V
Supply Voltage-Min (Vsup) 3V
Number of Channels 3
Interface Serial
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Number of Ports 2
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold NO
Switch Type PCMCIA Switch
Nominal Input Voltage 13.5V
Ratio - Input:Output 3:4
Voltage - Load 3.3V 5V
Min Current Limit 1A
Fault Protection Current Limiting (Fixed), Over Temperature
Rds On (Typ) 95m Ω
Height 2mm
Length 8.2mm
Width 5.3mm
Thickness 1.95mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mounting Type Surface Mount
Package / Case 24-SSOP (0.209, 5.30mm Width)
Surface Mount YES
Number of Pins 24
Weight 172.39345mg
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e4
Feature Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
ECCN Code EAR99
Resistance 85mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature BREAK-BEFORE-MAKE SWITCHING
Subcategory Power Management Circuits
Technology BICMOS
Terminal Position DUAL
Terminal Form GULL WING

TPS2223DBG4 Overview


It is packaged in the manner of a Tube.There is a 24-SSOP (0.209, 5.30mm Width) package that includes it.The lighting driver has the mounting type Surface Mount.There is a PCMCIA Switch switch type associated with it.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.As a default, the output is set to 4.Operation is based on a supply voltage of Not Required.Status Flag features are available on the lighting driver.It belongs to the TPS2223 family.In total, there are 24 terminations.For operation, we use the 24 pins.The LED driver has 1 functions.As long as the supply voltage is 3.3V, high efficiency can be achieved.24 pins are equipped with it.In this LED driving board, there is 85mOhm resistance.A self-contained LED driver with a capacity of Power Management Circuits is contained in an econtainer.In this LED driver, the maximum supply voltage is configured to be 3.6V (Vsup).A normal operation requires that the supply voltage (Vsup) remain above 3V.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 3 available channels.This part has a power supply of 3.35V volts.With this LED driver, BREAK-BEFORE-MAKE SWITCHING can also be produced.

TPS2223DBG4 Features


Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like BREAK-BEFORE-MAKE SWITCHING

TPS2223DBG4 Applications


There are a lot of Texas Instruments TPS2223DBG4 Power Switches ICs applications.

  • Portable GPS
  • Solid State Drivers
  • Solid-State Drives
  • Notebook PC
  • Notebook and Tablet Computers
  • Smart Phones, Feature Phones
  • Hot Swap
  • Set-Top Boxes
  • PC Cards
  • Wireless Modem Data Cards

Write a review

Note: HTML is not translated!
    Bad           Good