TPS2223PWP
| Parameters | |
|---|---|
| Additional Feature | BREAK-BEFORE-MAKE SWITCHING |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2223 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.35V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 2 |
| Nominal Supply Current | 140μA |
| Output Configuration | High Side |
| Power Dissipation | 3.322W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 1.15mm |
| Length | 7.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
TPS2223PWP Overview
It is packaged in the form of a Tube.This package is included in 24-TSSOP (0.173, 4.40mm Width) Exposed Pad.The LED driver is mounted as Surface Mount.There is a switch type of PCMCIA Switch.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The lighting driver has a total of 4 outputs that are available for use.In order to operate, it requires a voltage supply of Not Required.It has a total of Status Flag features.The TPS2223 family consists of this type.A total of 24 terminations can be found in it.24 pins are used for operation.As far as the lighting driver is concerned, there are 1 functions.This results in the maximum output current dropping to 1A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 3.3V.As a result, it is mounted in the manner of Surface Mount.24 pins are connected to it in total.It has a resistance of 85mOhm.This LED driver is self-contained in an econtainer with a capacity of Power Management Circuits.The lighting driver is configured to have a maximum supply voltage of 3.6V (Vsup).Normal operation requires Vsup above 3V.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 3 channels available.This part is powered by 3.35V.By using this lighting driver, it is also possible to produce BREAK-BEFORE-MAKE SWITCHING.
TPS2223PWP Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like BREAK-BEFORE-MAKE SWITCHING
TPS2223PWP Applications
There are a lot of Texas Instruments TPS2223PWP Power Switches ICs applications.
- Portable GPS
- USB3.1 Power Delivery
- PC Cards
- Wearable Devices
- Low Voltage I/O System Power
- HDD and SSD
- Smartphone and PDA
- USB Power Distribution
- Notebook PC
- Smart Phones, Feature Phones
