TPS2223PWPR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BREAK-BEFORE-MAKE SWITCHING |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2223 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.35V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 1.15mm |
| Length | 7.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS2223PWPR Overview
Tape & Reel (TR) is how it's packaged.There is a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package that includes it.A Surface Mount mounting is used for the LED driving board.There is a PCMCIA Switch switch type associated with it.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The LED driver has 4 outputs.The LED driving board operates at Not Required volts.In terms of features, the LED driving board has Status Flag.It belongs to the family TPS2223.A total of 24 terminations can be found in it.For operation, 24 pins are used.Currently, there are 1 functions associated with the lighting driver.The maximum output of the LED driving board is 1AV.With a supply voltage of 3.3V, high efficiency is possible.It is positioned in the direction of Surface Mount.24 pins are equipped with it.Currently, the LED driving board has a resistance of 85mOhm ohms.A container with a capacity of Power Management Circuits contains this self-contained lighting driver.The maximum supply voltage for this LED driver is 3.6V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 3V.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.The total number of channels is 3.In this part, the power supply is set to 3.35V.This LED driver can also produce BREAK-BEFORE-MAKE SWITCHING.
TPS2223PWPR Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like BREAK-BEFORE-MAKE SWITCHING
TPS2223PWPR Applications
There are a lot of Texas Instruments TPS2223PWPR Power Switches ICs applications.
- PC Card Hot Swap
- Portable GPS Device
- Set-Top Boxes
- Portable Music Players
- USB Protection
- Gaming
- Smart Phones, Feature Phones
- Hot Swap
- Solid-State Drives
- Set-top-box
