Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
24-SSOP (0.209, 5.30mm Width) |
Surface Mount |
YES |
Number of Pins |
24 |
Weight |
172.39345mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Resistance |
85mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING |
Subcategory |
Power Management Circuits |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Base Part Number |
TPS2224 |
Pin Count |
24 |
Number of Outputs |
4 |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Channels |
3 |
Interface |
Serial |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Number of Ports |
2 |
Nominal Supply Current |
140μA |
Output Configuration |
High Side |
Power Dissipation |
890mW |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Switch Type |
PCMCIA Switch |
Ratio - Input:Output |
3:4 |
Voltage - Load |
3.3V 5V 12V |
Min Current Limit |
1A |
Fault Protection |
Current Limiting (Fixed), Over Temperature |
Rds On (Typ) |
95m Ω |
Height |
2mm |
Length |
8.2mm |
Width |
5.3mm |
Thickness |
1.95mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2224ADBG4 Overview
The LED driver's packaged as a Tube.It's included in the 24-SSOP (0.209, 5.30mm Width) package.The mounting type of the LED driver is Surface Mount.PCMCIA Switch is the switch type that it owns.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The LED driver has 4 outputs.To operate, it needs a supply voltage of Not Required.Features of the lighting driver are Status Flag.It is part of the TPS2224 family of LED drivers.The termination count is 24.In order to operate, the 24 pins are used.It has 1 functions.Supply voltages of 3.3V allow for high efficiency.There are 24 pins in total on this board.Currently, the LED driving board has a resistance of 85mOhm ohms.A self-contained LED driver with a capacity of Power Management Circuits is contained in an econtainer.This LED driver is configured to have a maximum supply voltage of 3.6V (Vsup).A normal operation requires that the supply voltage (Vsup) remain above 3V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 3 channels available.The LED driver can also be used to produce POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING.
TPS2224ADBG4 Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING
TPS2224ADBG4 Applications
There are a lot of Texas Instruments TPS2224ADBG4 Power Switches ICs applications.
- PC Cards
- Wireless Modem Data Cards
- Portable GPS Device
- PDAs
- Hot Swaps
- USB Protection
- Portable Video Game Players
- Smart Phones, Feature Phones
- USB Power Distribution
- USB Ports/Hubs