TPS2224ADBR
| Parameters | |
|---|---|
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 2 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Min Current Limit | 1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2224 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
TPS2224ADBR Overview
It is package in Tape & Reel (TR) case.This file is included in package 24-SSOP (0.209, 5.30mm Width).This LED driving board is mounted using the mounting type Surface Mount.There is a PCMCIA Switch switch type associated with it.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The lighting driver has a total of 4 outputs that are available for use.A supply voltage of Not Required is required for it to operate.A lighting driver with Status Flag features is available.There is a TPS2224 family of things that it belongs to.There are 24 terminations in it.24 pins are used for operation.The LED driver has 1 functions.A supply voltage of 3.3V leads to high efficiency.It is equipped with a total of 24 pins.85mOhm is the resistance of the lighting driver.A self-contained container with a capacity of Power Management Circuits contains this lighting driver.The LED driver is configured with a maximum supply voltage of 3.6V (Vsup).Normal operation requires Vsup above 3V.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 3 channels.Through the use of this lighting driver, we can also produce POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING.
TPS2224ADBR Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING
TPS2224ADBR Applications
There are a lot of Texas Instruments TPS2224ADBR Power Switches ICs applications.
- PC Cards
- PC Card Hot Swap
- Smart Phones, Feature Phones
- Storage Drives
- Mobile Communication Devices
- Solid State Drivers
- Wireless Modem Data Cards
- HDD, SSD
- USB Power Distribution
- HDD and SSD
