TPS2224APWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2224 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Output Voltage | 6V |
| Max Output Current | 1A |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 2 |
| Nominal Supply Current | 140μA |
| Output Configuration | High Side |
| Power Dissipation | 890mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2224APWP Overview
It is packaged in the manner of a Tube.It is included in the package 24-TSSOP (0.173, 4.40mm Width) Exposed Pad.This lighting drivere has a mounting type of Surface Mount.There is a switch type of PCMCIA Switch.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.There are 4 outputs available on this lighting driver.A voltage of Not Required is used to power it.A lighting driver with Status Flag features is available.It is a member of the TPS2224 family.A total of 24 terminations have been recorded.24 pins are used for operation.There are 1 functions of the LED driver.Maximum output current falls to 1A when operation criteria are met.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.This lighting driver is mounted in the way of Surface Mount.It is equipped with a total of 24 pins.85mOhm is the resistance of the lighting driver.This LED driver is self-contained in an econtainer with a capacity of Power Management Circuits.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 3V.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.We offer 3 channels in total.By using this lighting driver, it is also possible to produce POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING.
TPS2224APWP Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING
TPS2224APWP Applications
There are a lot of Texas Instruments TPS2224APWP Power Switches ICs applications.
- USB Protection
- Portable/Handheld Devices
- Portable GPS
- Portable Music Players
- Wireless Modem Data Cards
- HDD and SSD
- Wearable Devices
- Gaming
- Hard Disk Drives
- Various applications equipped with buttons
