TPS2224APWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2224 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Number of Ports | 2 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2224APWPR Overview
It is packaged in the form of a Tape & Reel (TR).Package 24-TSSOP (0.173, 4.40mm Width) Exposed Pad contains it.This lighting drivere has a mounting type of Surface Mount.It owns PCMCIA Switch switch type.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The lighting driver has a total of 4 outputs that are available for use.Operation is based on a supply voltage of Not Required.This LED driving board is equipped with Status Flag features in order for it to be useful.As you can see, it comes from the TPS2224 family.A total of 24 terminations can be found in it.The operation is carried out using the 24 pins.It has 1 functions.The lighting driver's maximum output is 1AV.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.Surface Mount is mounted in the way.The LED driver has a total of 24 pins.Currently, the LED driving board has a resistance of 85mOhm ohms.It is self-contained in an econtainer with a capacity of Power Management Circuits.The maximum supply voltage is set to 3.6V.In order to operate normally, the supply voltage (Vsup) must remain above 3V.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 3 channels.With this LED driver, POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING can also be produced.
TPS2224APWPR Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING
TPS2224APWPR Applications
There are a lot of Texas Instruments TPS2224APWPR Power Switches ICs applications.
- Mobile Communication Devices
- PC Card Hot Swap
- Low Voltage I/O System Power
- USB Power Distribution
- Portable Music Players
- Smart Phones, Feature Phones
- Handheld Devices
- Hard Disk Drives
- Portable Devices
- Set-top-box
