TPS2224DB
| Parameters | |
|---|---|
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2224 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 2 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Min Current Limit | 1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BREAK-BEFORE-MAKE SWITCHING |
| Subcategory | Power Management Circuits |
TPS2224DB Overview
The LED driver's packaged as a Tube.The 24-SSOP (0.209, 5.30mm Width) package includes it.A Surface Mount mounting is used for the LED driving board.It owns the PCMCIA Switch switch type.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.By default, it is set to output 4.A voltage of Not Required is used to power it.As far as features are concerned, the LED driving board has Status Flag.This object belongs to the TPS2224 family.It contains 24 terminations.In order to operate, 24 pins are used.Currently, there are 1 functions associated with the lighting driver.To meet the operation criteria, the maximum output current drops to 1A.The supply voltage of 3.3V is conducive to high efficiency.There are 24 pins in total on this board.85mOhm resistance is present in the lighting driver.This LED driver is self-contained in an econtainer with a capacity of Power Management Circuits.The LED driver is configured with a maximum supply voltage of 3.6V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 3V.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.There are a total of 3 available channels.Using this LED driver, it is also possible to produce BREAK-BEFORE-MAKE SWITCHING.
TPS2224DB Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like BREAK-BEFORE-MAKE SWITCHING
TPS2224DB Applications
There are a lot of Texas Instruments TPS2224DB Power Switches ICs applications.
- PC Cards
- Gaming
- Hot-Swap Systems
- Wireless Modem Data Cards
- Notebook PC
- Hot Swaps
- Solid-State Drives
- Storage Drives
- Portable Devices
- USB Power Distribution
