TPS2224DBR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BREAK-BEFORE-MAKE SWITCHING |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2224 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 2 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Min Current Limit | 1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 1.95mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS2224DBR Overview
The LED driver's packaged as a Tape & Reel (TR).It is included in the package 24-SSOP (0.209, 5.30mm Width).The lighting driver is mounted in the Surface Mount position.The switch type of this switch is PCMCIA Switch.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver has a total of 4 outputs.A supply voltage of Not Required is required for it to operate.As far as features are concerned, the LED driving board has Status Flag.As you can see, it comes from the TPS2224 family.There are 24 terminations in it.It is necessary to use the 24 pins in order to operate the LED driver.As far as functions are concerned, the lighting driver has 1.Supply voltages of 3.3V allow for high efficiency.The LED driver has a total of 24 pins.Currently, the LED driving board has 85mOhm resistance.This LED driver is self-contained in an econtainer with a capacity of Power Management Circuits.The maximum supply voltage for this lighting driver is set to 3.6V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 3V.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.We currently have 3 channels available.As a result of using this lighting driver, BREAK-BEFORE-MAKE SWITCHING can also be produced.
TPS2224DBR Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like BREAK-BEFORE-MAKE SWITCHING
TPS2224DBR Applications
There are a lot of Texas Instruments TPS2224DBR Power Switches ICs applications.
- Storage (HDDs, SSDs)
- PC Card Hot Swap
- Portable Devices
- Mobile Communication Devices
- PDAs
- Low Voltage I/O System Power
- USB Power Distribution
- USB Protection
- PC Cards
- Wearable Devices
