TPS2226ADB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 30 |
| Weight | 217.61094mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Additional Feature | POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2226 |
| Pin Count | 30 |
| Number of Outputs | 4 |
| Output Voltage | 6V |
| Max Output Current | 1A |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 2 |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2226ADB Overview
It is package in Tube case.In the 30-SSOP (0.209, 5.30mm Width) package, it is included.This LED driving board is mounted using the mounting type Surface Mount.The switch type of this switch is PCMCIA Switch.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The LED driver has 4 outputs.A voltage of Not Required is used to power it.It has a total of Status Flag features.It comes under the family of TPS2226.A total of 30 terminations can be found in it.It is necessary to use the 30 pins in order to operate the LED driver.It is important to note that the LED driving board has 1 functions.The maximum output current must drop to 1A to meet the operation criteria.High efficiency is possible at 3.3V supply voltage.It is positioned in the direction of Surface Mount.A total of 30 pins are included in this LED driver.85mOhm resistance is present in the lighting driver.The output current is set to 1A in this case.It is self-contained in an econtainer with a capacity of Power Management Circuits.The supply voltage (Vsup) should be kept above 3V for normal operation.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.There are a total of 3 channels available.As a result of using this lighting driver, POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING can also be produced.
TPS2226ADB Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING
TPS2226ADB Applications
There are a lot of Texas Instruments TPS2226ADB Power Switches ICs applications.
- Portable Video Game Players
- PDAs
- Wireless Headsets
- Hot Swap
- PC Cards
- USB Protection
- Portable GPS
- Solid State Drivers
- Smartphone and PDA
- Wireless/Networking Cards
