TPS2226ADBG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 30 |
| Weight | 217.61094mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2226 |
| Pin Count | 30 |
| Number of Outputs | 4 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Number of Ports | 2 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2226ADBG4 Overview
It's?packaged?in?the way?of?a?Tube.It's included in the 30-SSOP (0.209, 5.30mm Width) package.In this case, the LED driving board is mounted as Surface Mount.The switch type of this switch is PCMCIA Switch.To ensure reliable operation, set the temperature to -40°C~85°C TA.The LED driver has 4 outputs.With a supply voltage of Not Required, the LED driving board operates.It is equipped with Status Flag features.There is a TPS2226 family of things that it belongs to.It consists of 30 terminations in total.It is necessary to use the 30 pins in order to operate the LED driver.The LED driving board has a total of 1 functions.This lighting driver is capable of delivering a maximum output of 1A volts.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.It is mounted in the way of Surface Mount.It is equipped with a total of 30 pins.It has a resistance of 85mOhm.A self-contained container with a capacity of Power Management Circuits contains this lighting driver.The LED driver is configured with a maximum supply voltage of 3.6V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 3V.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.The total number of channels is 3.By using this lighting driver, it is also possible to produce POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING.
TPS2226ADBG4 Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING
TPS2226ADBG4 Applications
There are a lot of Texas Instruments TPS2226ADBG4 Power Switches ICs applications.
- Solid-State Drives
- Gaming
- Hard Disk Drives
- Wearable Devices
- Portable GPS
- Notebook PC
- Portable Video Game Players
- USB Ports/Hubs
- PC Cards
- USB Protection
