Parameters |
Current - Output (Max) |
1A |
Number of Ports |
2 |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Switch Type |
PCMCIA Switch |
Nominal Input Voltage |
13.5V |
Ratio - Input:Output |
3:4 |
Voltage - Load |
3.3V 5V 12V |
Fault Protection |
Current Limiting (Fixed), Over Temperature |
Rds On (Typ) |
95m Ω |
Height |
2mm |
Length |
10.2mm |
Width |
5.3mm |
Thickness |
1.95mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
30-SSOP (0.209, 5.30mm Width) |
Number of Pins |
30 |
Weight |
217.61094mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
30 |
ECCN Code |
EAR99 |
Resistance |
85mOhm |
Additional Feature |
POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING |
Subcategory |
Power Management Circuits |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Base Part Number |
TPS2226 |
Pin Count |
30 |
Number of Outputs |
4 |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Channels |
3 |
Interface |
Serial |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
TPS2226ADBR Overview
Tape & Reel (TR) is the way it's packaged.It is included in the package 30-SSOP (0.209, 5.30mm Width).The LED driver is mounted as Surface Mount.It owns the PCMCIA Switch switch type.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.As a default, the output is set to 4.A voltage of Not Required is used to power it.It is equipped with Status Flag features.It is part of the TPS2226 family of LED drivers.The termination count is 30.The operation is carried out using the 30 pins.As far as functions are concerned, the lighting driver has 1.From the lighting driver, there is a maximum output of 1AV.With a supply voltage of 3.3V, high efficiency is possible.This lighting driver is mounted in the way of Surface Mount.A total of 30 pins are included in this LED driver.It has 85mOhm resistance.The LED driver is packaged in an econtainer with a capacity of Power Management Circuits.In this case, Vsup (maximum supply voltage) is set to 3.6V.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 3V.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.You can select from 3 channels.POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING can also be produced by using this LED driver.
TPS2226ADBR Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING
TPS2226ADBR Applications
There are a lot of Texas Instruments TPS2226ADBR Power Switches ICs applications.
- Solid State Drivers
- Hot Swap
- Portable GPS Device
- Portable Music Players
- Various applications equipped with buttons
- Mobile Communication Devices
- Gaming
- Set-Top Boxes
- Portable GPS
- Portable/Handheld Devices