TPS2226ADBRG4
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 30 |
| Weight | 217.61094mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2226 |
| Pin Count | 30 |
| Number of Outputs | 4 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Number of Ports | 2 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
TPS2226ADBRG4 Overview
A Tape & Reel (TR) is used to package it.It is included in the package 30-SSOP (0.209, 5.30mm Width).It has been mounted as Surface Mount on the LED driver.PCMCIA Switch is the switch type that it owns.Ensure reliable operation by setting the temperature to -40°C~85°C TA.There are 4 outputs available on this lighting driver.In order to operate, it requires a voltage supply of Not Required.Features of the lighting driver are Status Flag.It comes under the family of TPS2226.It consists of 30 terminations in total.During operation, the 30 pins are used.Currently, the lighting driver has a total of 1 functions.In terms of output, the lighting driver can provide a maximum of 1A V.The supply voltage can be 3.3V for high efficiency.The lighting driver is mounted in the way of Surface Mount.30 pins are equipped with it.In this LED driving board, there is 85mOhm resistance.Self-contained LED driver with Power Management Circuits capacity in an econtainer.The Vsup value (maximum supply voltage) is set to 3.6V.In order to operate normally, the supply voltage (Vsup) must remain above 3V.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.You can select from 3 channels.The LED driver can also be used to produce POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING.
TPS2226ADBRG4 Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING
TPS2226ADBRG4 Applications
There are a lot of Texas Instruments TPS2226ADBRG4 Power Switches ICs applications.
- HDD and SSD
- PDAs
- Storage (HDDs, SSDs)
- Wireless Headsets
- Smart Phones, Feature Phones
- USB Power Distribution
- Handheld Devices
- Hot Swaps
- Gaming
- Notebook and Tablet Computers
