TPS2226DB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 30 |
| Weight | 217.61094mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Additional Feature | BREAK-BEFORE-MAKE SWITCHING |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2226 |
| Pin Count | 30 |
| Number of Outputs | 4 |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3512V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 1.09W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Supply Current-Max (Isup) | 0.2mA |
| Nominal Input Voltage | 13.5V |
| Continuous Drain Current (ID) | 1A |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Drain to Source Resistance | 2.5Ohm |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2226DB Overview
The package is in the form of a Tube.It's included in the 30-SSOP (0.209, 5.30mm Width) package.The lighting driver has the mounting type Surface Mount.There is a switch type of PCMCIA Switch.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The LED driver has 4 outputs.In order to operate, it requires a voltage supply of Not Required.It is equipped with Status Flag features.There is a TPS2226 family of things that it belongs to.It contains 30 terminations.It is necessary to use the 30 pins in order to operate the LED driver.There are 1 functions of the LED driver.The maximum output current is reduced to 1A to meet the operation criteria.Using a voltage of 3.3V allows for high efficiency.The lighting driver is mounted in the way of Surface Mount.In total, it has 30 pins.Self-contained LED driver with Power Management Circuits capacity in an econtainer.The lighting driver is configured to have a maximum supply voltage of 3.6V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 3V.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 3 channels.The power supply of the part is 3.3512V.With this LED driver, BREAK-BEFORE-MAKE SWITCHING can also be produced.The maximum supply current for the LED driver is 0.2mA when it is operating.
TPS2226DB Features
Supplied from 3.3V
3 channels
Additional features like BREAK-BEFORE-MAKE SWITCHING
TPS2226DB Applications
There are a lot of Texas Instruments TPS2226DB Power Switches ICs applications.
- Wireless Modem Data Cards
- HDD, SSD
- Solid-State Drives
- Solid State Drivers
- Low Voltage I/O System Power
- Set-top-box
- PC Card Hot Swap
- Notebook and Tablet Computers
- USB Power Distribution
- USB Protection
