TPS2226DBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 30 |
| Weight | 217.61094mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BREAK-BEFORE-MAKE SWITCHING |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2226 |
| Pin Count | 30 |
| Number of Outputs | 4 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3512V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Supply Current-Max (Isup) | 0.2mA |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2226DBR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It's included in the 30-SSOP (0.209, 5.30mm Width) package.The mounting type of the LED driver is Surface Mount.There is a PCMCIA Switch switch type associated with it.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.In this LED driver, there are no outputs available.A supply voltage of Not Required is required for it to operate.The lighting driver has Status Flag features.It is part of the TPS2226 family of LED drivers.As a result, there are 30 terminations.For operation, 30 pins are used.It has 1 functions.There is a maximum output of 1AV from the LED driver.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.As a result, it is mounted in the manner of Surface Mount.30 pins are equipped with it.There is a Power Management Circuits capacity container for this LED driver that is self-contained.In this LED driver, the maximum supply voltage is configured to be 3.6V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 3V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.We currently have 3 channels available.In this case, the power supply is 3.3512V.As a result of using this lighting driver, BREAK-BEFORE-MAKE SWITCHING can also be produced.For operation, it can supply a maximum current of 0.2mA.
TPS2226DBR Features
Supplied from 3.3V
3 channels
Additional features like BREAK-BEFORE-MAKE SWITCHING
TPS2226DBR Applications
There are a lot of Texas Instruments TPS2226DBR Power Switches ICs applications.
- Set-top-box
- Hard Disk Drives
- Storage Drives
- Portable Music Players
- HDD, SSD
- PDAs
- Wireless Modem Data Cards
- Hot Swaps
- USB Ports/Hubs
- Telecom and Network Systems
