TPS2228DBR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 30 |
| Weight | 217.61094mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Resistance | 72mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO REQUIRES A SUPPLY OF 2.7 TO 5.5V & 1.7 TO 1.9V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2228 |
| Pin Count | 30 |
| Number of Outputs | 4 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.83.35V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 1.8V 3.3V 5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 97m Ω |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS2228DBR Overview
Tape & Reel (TR) is how it's packaged.Package 30-SSOP (0.209, 5.30mm Width) contains it.The LED driver is mounted as Surface Mount.PCMCIA Switch is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~85°C TA.It is possible to use 4 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.Currently, the LED driving board is equipped with Status Flag features.As you can see, it comes from the TPS2228 family.It contains 30 terminations.In order to operate, the 30 pins are used.It has 1 functions.This lighting driver is capable of delivering a maximum output of 1A volts.With a supply voltage of 3.3V, high efficiency is possible.The LED driving board is mounted in the way of Surface Mount.It is equipped with a total of 30 pins.Currently, the LED driving board has a resistance of 72mOhm ohms.A self-contained LED driver with a capacity of Power Management Circuits is contained in an econtainer.In this LED driver, the maximum supply voltage is configured to be 3.6V (Vsup).Normal operation requires a voltage above 3V for the supply voltage.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.There are a total of 3 available channels.It has a power supply of 1.83.35V.This LED driver can also produce ALSO REQUIRES A SUPPLY OF 2.7 TO 5.5V & 1.7 TO 1.9V.
TPS2228DBR Features
Supplied from 3.3V
Resistance of 72mOhm
3 channels
Additional features like ALSO REQUIRES A SUPPLY OF 2.7 TO 5.5V & 1.7 TO 1.9V
TPS2228DBR Applications
There are a lot of Texas Instruments TPS2228DBR Power Switches ICs applications.
- Hot Swap
- Storage (HDDs, SSDs)
- Handheld Devices
- Mobile Communication Devices
- Notebook PC
- Hot Swaps
- Wireless Modem Data Cards
- Portable/Handheld Devices
- Notebook and Tablet Computers
- Set-Top Boxes
