TPS2231MRGPR-3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Power Good, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 45mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2231 |
| Pin Count | 20 |
| Number of Outputs | 3 |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Interface | Parallel |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1.3A |
| Number of Ports | 1 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | ExpressCard™ Switch |
| Threshold Voltage | +1.35 3V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.5V 3.3V |
| Min Current Limit | 2.5A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 45m Ω |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 930μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2231MRGPR-3 Overview
The package is in the form of a Tape & Reel (TR).In the 20-VFQFN Exposed Pad package, it is included.The lighting driver has the mounting type Surface Mount.There is a ExpressCard? Switch switch type associated with it.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The LED driver has 3 outputs.The LED driving board operates at Not Required volts.A lighting driver with Power Good, Status Flag features is available.It is part of the TPS2231 family of LED drivers.A total of 20 terminations have been recorded.It is necessary to use the 20 pins in order to operate the LED driver.It has 1 functions.The lighting driver's maximum output is 1.3AV.High efficiency is possible when the supply voltage is set to 3.3V.As a result, it has a total of 20 pins.In this case, there is 45mOhm resistance in the LED driving board.There is a Power Management Circuits capacity container for this LED driver that is self-contained.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 3V.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.There are a total of 1 channels available.
TPS2231MRGPR-3 Features
Supplied from 3.3V
Resistance of 45mOhm
1 channels
TPS2231MRGPR-3 Applications
There are a lot of Texas Instruments TPS2231MRGPR-3 Power Switches ICs applications.
- Notebook and Tablet Computers
- Set-Top Boxes
- Hot Swap
- Various applications equipped with buttons
- Gaming
- Low Voltage I/O System Power
- Solid State Drivers
- HDD and SSD
- USB3.1 Power Delivery
- PDAs
