TPS2231MRGPTG4
| Parameters | |
|---|---|
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2231 |
| Pin Count | 20 |
| Number of Outputs | 3 |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Interface | Parallel |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1.3A |
| Number of Ports | 1 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | ExpressCard™ Switch |
| Nominal Input Voltage | 3.6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.5V 3.3V |
| Min Current Limit | 2.5A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 45m Ω |
| Height | 930μm |
| Length | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 46.209723mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Power Good, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 45mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
TPS2231MRGPTG4 Overview
The package is in the form of a Tape & Reel (TR).This file is included in package 20-VFQFN Exposed Pad.The lighting driver has the mounting type Surface Mount.There is a ExpressCard? Switch switch type associated with it.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The LED driver has 3 outputs.It uses a supply voltage of Not Required to operate.It is equipped with Power Good, Status Flag features.It is a member of the TPS2231 family.A total of 20 terminations have been found in it.During operation, the 20 pins are used.As far as functions are concerned, the lighting driver has 1.Its maximum output voltage is 1.3AV.With a supply voltage of 3.3V, high efficiency is possible.20 pins are connected to it in total.Currently, the LED driving board has a resistance of 45mOhm ohms.The LED driver is packaged in an econtainer with a capacity of Power Management Circuits.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 3V.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.We offer 1 channels in total.
TPS2231MRGPTG4 Features
Supplied from 3.3V
Resistance of 45mOhm
1 channels
TPS2231MRGPTG4 Applications
There are a lot of Texas Instruments TPS2231MRGPTG4 Power Switches ICs applications.
- Set-top-box
- Portable GPS
- Mobile Communication Devices
- HDD and SSD
- Set-Top Boxes
- Portable Devices
- Smartphone and PDA
- Hot Swap
- Smart Phones, Feature Phones
- Storage Drives
