TPS2231PWPRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Power Good, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 45mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2231 |
| Pin Count | 24 |
| Number of Outputs | 3 |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Interface | Parallel |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1.3A |
| Number of Ports | 1 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | ExpressCard™ Switch |
| Nominal Input Voltage | 3.6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.5V 3.3V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 45m Ω |
| Height | 1.15mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2231PWPRG4 Overview
The package is in the form of a Tape & Reel (TR).There is a package for it in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package.A Surface Mount mounting is used for the LED driving board.ExpressCard? Switch is the type of switch owned by it.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The LED driver has 3 outputs.A voltage of Not Required is used to power it.It is equipped with Power Good, Status Flag features.It belongs to the TPS2231 family.A total of 24 terminations have been recorded.The operation is performed through the 24 pins.The LED driver has 1 functions.From the lighting driver, there is a maximum output of 1.3AV.It is possible to obtain high efficiency with a supply voltage of 3.3V.The LED driving board is mounted in the way of Surface Mount.A total of 24 pins are included in this LED driver.In this LED driving board, there is 45mOhm resistance.A container with a capacity of Power Management Circuits contains this self-contained lighting driver.In order to operate normally, the supply voltage (Vsup) must remain above 3V.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.In total, 1 channels are available.
TPS2231PWPRG4 Features
Supplied from 3.3V
Resistance of 45mOhm
1 channels
TPS2231PWPRG4 Applications
There are a lot of Texas Instruments TPS2231PWPRG4 Power Switches ICs applications.
- Wireless/Networking Cards
- PC Card Hot Swap
- Gaming
- Hot Swaps
- Notebook and Tablet Computers
- Low Voltage I/O System Power
- Smartphone and PDA
- Set-top-box
- USB Power Distribution
- Portable/Handheld Devices
