TPS2231RGPTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 46.209723mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Power Good, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 45mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Power Rating | 3.278W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2231 |
| Pin Count | 20 |
| Number of Outputs | 3 |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Interface | Parallel |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1.3A |
| Number of Ports | 1 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | ExpressCard™ Switch |
| Nominal Input Voltage | 3.6V |
| Threshold Voltage | +1.35 3V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.5V 3.3V |
| Min Current Limit | 2.5A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 45m Ω |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 930μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2231RGPTG4 Overview
The package is in the form of a Tape & Reel (TR).It is included with the 20-VFQFN Exposed Pad package as well.The mounting type of the LED driver is Surface Mount.There is a ExpressCard? Switch switch type associated with it.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The lighting driver has a total of 3 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.It is equipped with Power Good, Status Flag features.It belongs to the family TPS2231.The termination count is 20.In order to operate, the 20 pins are used.As far as functions are concerned, the lighting driver has 1.From the lighting driver, there is a maximum output of 1.3AV.The supply voltage of 3.3V is conducive to high efficiency.In total, it has 20 pins.Lighting drivers with 45mOhm resistance are used.Self-contained LED driver with Power Management Circuits capacity in an econtainer.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 3V.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.To choose from, there are 1 channels.
TPS2231RGPTG4 Features
Supplied from 3.3V
Resistance of 45mOhm
1 channels
TPS2231RGPTG4 Applications
There are a lot of Texas Instruments TPS2231RGPTG4 Power Switches ICs applications.
- Portable GPS
- Wireless/Networking Cards
- Hard Disk Drives
- Hot Swap
- Portable Video Game Players
- Hot Swap
- Hot Swaps
- Mobile Communication Devices
- Portable Devices
- Solid-State Drives
