TPS22901YFPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-XFBGA, DSBGA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 95mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 480mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TPS22901 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 3.6V |
| Supply Voltage-Min (Vsup) | 1V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 137nA |
| Output Configuration | High Side |
| Power Dissipation | 480mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 880nA |
| Adjustable Threshold | NO |
| Quiescent Current | 204nA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 33 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1V |
| Max Input Voltage | 3.6V |
| Nominal Input Voltage | 3.6V |
| Turn-Off Delay Time | 39 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1V~3.6V |
| Rds On (Typ) | 78m Ω |
| Height | 500μm |
| Length | 0m |
| Width | 0m |
| Thickness | 0m |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22901YFPR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).In the 4-XFBGA, DSBGA package, it is included.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type that it owns.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.There are 1 outputs available on this lighting driver.It uses a supply voltage of Not Required to operate.The maximum output voltage is P-Channel volts.Features of the lighting driver are Slew Rate Controlled.It belongs to the family TPS22901.There are 4 terminations in it.In order to operate, the 4 pins are used.Currently, there are 1 functions associated with the lighting driver.To meet the operation criteria, the maximum output current drops to 500mA.It is possible to obtain high efficiency with a supply voltage of 1.8V.Surface Mount is mounted in the way of this lighting driver.This LED driver is equipped with a total of 4 pins.95mOhm resistance is present in the lighting driver.In this case, the output current will be set to 500mA.For normal operation, the supply voltage (Vsup) must be kept above 1V.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.We offer 1 channels in total.In order to optimize the efficiency of the supply voltage, it should be set to 3.6V.There is a maximum input voltage of 3.6V volts.There is a minimum input voltage of 1V volts for this LED driver.880nA is the maximum current required to operate it.
TPS22901YFPR Features
Supplied from 1.8V
Resistance of 95mOhm
1 channels
TPS22901YFPR Applications
There are a lot of Texas Instruments TPS22901YFPR Power Switches ICs applications.
- Portable Video Game Players
- Portable GPS
- Telecom and Network Systems
- Notebook PC
- Gaming
- PC Cards
- Portable/Handheld Devices
- Smart Phones, Feature Phones
- Notebook and Tablet Computers
- Mobile Communication Devices
