TPS22902BYFPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-XFBGA, DSBGA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 95mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 480mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TPS22902 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Number of Channels | 1 |
| Voltage | 3.6V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 137nA |
| Current | 500mA |
| Output Configuration | High Side |
| Power Dissipation | 480mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 880nA |
| Adjustable Threshold | NO |
| Quiescent Current | 204nA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 33 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1V |
| Max Input Voltage | 3.6V |
| Nominal Input Voltage | 3.6V |
| Turn-Off Delay Time | 7 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1V~3.6V |
| Rds On (Typ) | 78m Ω |
| Height | 500μm |
| Length | 0m |
| Width | 0m |
| Thickness | 0m |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22902BYFPR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).Package 4-XFBGA, DSBGA contains it.The lighting driver has the mounting type Surface Mount.General Purpose is the switch type that it owns.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The LED driver has a total of 1 outputs.A voltage of Not Required is used to power it.It has a maximum output voltage of P-Channel volts.As far as features are concerned, the LED driving board has Load Discharge, Slew Rate Controlled.It is part of the TPS22902 family of LED drivers.It contains 4 terminations.4 pins are used for operation.The LED driver has 1 functions.The maximum output current is reduced to 500mA to meet the operation criteria.High efficiency is possible when the supply voltage is set to 1.8V.The lighting driver is mounted in the direction of Surface Mount.There are 4 pins in total on this board.In this LED driving board, there is 95mOhm resistance.The output current is set to 500mA in this case.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.This LED driver can handle voltages up to 3.6V volts.There is a minimum input voltage of 1V volts.It operates at a maximum current of 880nA.
TPS22902BYFPR Features
Supplied from 1.8V
Resistance of 95mOhm
1 channels
TPS22902BYFPR Applications
There are a lot of Texas Instruments TPS22902BYFPR Power Switches ICs applications.
- Set-Top Boxes
- Handheld Devices
- Portable Devices
- Portable Music Players
- Wearable Devices
- Hot Swap
- Hot Swaps
- Solid State Drivers
- USB Power Distribution
- Various applications equipped with buttons
