TPS22902YFPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-XFBGA, DSBGA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 109mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 480mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TPS22902 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 3.6V |
| Supply Voltage-Min (Vsup) | 1V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 137nA |
| Output Configuration | High Side |
| Power Dissipation | 480mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 880nA |
| Adjustable Threshold | NO |
| Quiescent Current | 204nA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 46 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1V |
| Max Input Voltage | 3.6V |
| Turn-Off Delay Time | 156 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1V~3.6V |
| Rds On (Typ) | 78m Ω |
| Height | 500μm |
| Length | 0m |
| Width | 0m |
| Thickness | 0m |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22902YFPR Overview
The package is in the form of a Tape & Reel (TR).This package is included in 4-XFBGA, DSBGA.A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.To ensure reliable operation, set the temperature to -40°C~85°C TA.The LED driver has 1 outputs.Operation is based on a supply voltage of Not Required.The maximum output voltage is P-Channel volts.Load Discharge, Slew Rate Controlled features are available on the lighting driver.The TPS22902 family consists of this type.It contains 4 terminations.During operation, the 4 pins are used.The LED driving board has a total of 1 functions.The maximum output current drops to 500mA in order to meet the operation criteria.High efficiency is possible at 1.8V supply voltage.Surface Mount is mounted in the way.The LED driving board is equipped with a total of 4 pins.It has a resistance of 109mOhm.This case has the output current set to 500mA.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 1V.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.You can select from 1 channels.For maximum efficiency, the supply voltage should be set to 3.6V.Input voltage is limited to 3.6V volts.It has a 1V volt minimum input voltage.880nA is the maximum current required to operate it.
TPS22902YFPR Features
Supplied from 1.8V
Resistance of 109mOhm
1 channels
TPS22902YFPR Applications
There are a lot of Texas Instruments TPS22902YFPR Power Switches ICs applications.
- USB Power Distribution
- HDD, SSD
- Set-Top Boxes
- Smartphone and PDA
- USB3.1 Power Delivery
- USB Protection
- Hot Swaps
- Portable Devices
- Portable Video Game Players
- Notebook PC
