TPS22904YFPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-XFBGA, DSBGA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 480mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS22904 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Operating Supply Voltage | 3.6V |
| Number of Channels | 1 |
| Interface | On/Off |
| Nominal Supply Current | 1μA |
| Output Configuration | High Side |
| Power Dissipation | 480mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Quiescent Current | 180nA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.1V |
| Max Input Voltage | 3.6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.1V~3.6V |
| Rds On (Typ) | 66m Ω |
| Height | 500μm |
| Length | 0m |
| Width | 0m |
| Thickness | 0m |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22904YFPR Overview
Tape & Reel (TR) is the way it's packaged.It is included with the 4-XFBGA, DSBGA package as well.It has been mounted as Surface Mount on the LED driver.There is a General Purpose switch type associated with it.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board operates with a supply voltage of Not Required.A maximum voltage of P-Channel volts is available from the output of this LED driver.It has a total of Load Discharge, Slew Rate Controlled features.This object belongs to the TPS22904 family.It contains 4 terminations.The operation is carried out using the 4 pins.As far as functions are concerned, the lighting driver has 1.High efficiency is possible at 3.3V supply voltage.Surface Mount is mounted in the way.There are 4 pins in total on this board.In this case, the output current is set to 500mA.We currently have 1 channels available.Optimal efficiency requires a voltage of 3.6V.This LED driving board can accept voltages up to 3.6V volts as an input.It requires 1.1V volts as the minimum input voltage.In the case of this electrical component, it is classified as General Purpose.
TPS22904YFPR Features
Supplied from 3.3V
1 channels
TPS22904YFPR Applications
There are a lot of Texas Instruments TPS22904YFPR Power Switches ICs applications.
- Portable GPS
- Wireless Headsets
- Hot-Swap Systems
- Hot Swaps
- Low Voltage I/O System Power
- Portable GPS Device
- Portable Devices
- Mobile Communication Devices
- Notebook and Tablet Computers
- Various applications equipped with buttons
