Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
4-XFBGA, DSBGA |
Number of Pins |
4 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e1 |
Feature |
Load Discharge, Slew Rate Controlled |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
4 |
ECCN Code |
EAR99 |
Resistance |
90mOhm |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Max Power Dissipation |
480mW |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
TPS22904 |
Pin Count |
4 |
Number of Outputs |
1 |
Output Type |
P-Channel |
Max Output Current |
500mA |
Number of Channels |
1 |
Voltage |
3.6V |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Nominal Supply Current |
1μA |
Current |
500mA |
Output Configuration |
High Side |
Power Dissipation |
480mW |
Output Current |
500mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
1μA |
Adjustable Threshold |
NO |
Quiescent Current |
180nA |
Input Type |
Non-Inverting |
Turn On Delay Time |
1.5 μs |
Switch Type |
General Purpose |
Min Input Voltage |
1.1V |
Max Input Voltage |
3.6V |
Nominal Input Voltage |
1.1V |
Turn-Off Delay Time |
7 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
1.1V~3.6V |
Rds On (Typ) |
66m Ω |
Height |
500μm |
Length |
0m |
Width |
0m |
Thickness |
0m |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS22904YFPT Overview
Tape & Reel (TR) is the way it's packaged.This file is included in package 4-XFBGA, DSBGA.The lighting driver is mounted in the Surface Mount position.There is a General Purpose switch type associated with it.Ensure reliable operation by setting the temperature to -40°C~85°C TA.In this LED driver, there are no outputs available.A voltage of Not Required is used to power it.There is a maximum output voltage of P-Channel volts.This LED driving board is equipped with Load Discharge, Slew Rate Controlled features in order for it to be useful.It comes under the family of TPS22904.It has a total of 4 terminations.In order to operate, the 4 pins are used.It contains 1 functions.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.As long as the supply voltage is 3.3V, high efficiency can be achieved.Surface Mount is mounted in the way of this lighting driver.A total of 4 pins are included in this LED driver.It has a resistance of 90mOhm.When this case is used, the output current is set to 500mA.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.In total, 1 channels are available.It has a maximum input voltage of 3.6V volts.The minimum input voltage is 1.1V volts.There is a maximum current requirement of 1μA for its operation.
TPS22904YFPT Features
Supplied from 3.3V
Resistance of 90mOhm
1 channels
TPS22904YFPT Applications
There are a lot of Texas Instruments TPS22904YFPT Power Switches ICs applications.
- USB Protection
- Portable Devices
- USB Power Distribution
- Portable/Handheld Devices
- Hot Swap
- PC Card Hot Swap
- HDD and SSD
- USB3.1 Power Delivery
- Telecom and Network Systems
- Set-top-box