TPS22906YZVR
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-XFBGA, DSBGA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 480mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22906 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 3.6V |
| Supply Voltage-Min (Vsup) | 1V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 137nA |
| Output Configuration | High Side |
| Power Dissipation | 480mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Quiescent Current | 204nA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1V |
| Max Input Voltage | 3.6V |
| Supply Current-Max (Isup) | 0.00088mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1V~3.6V |
| Rds On (Typ) | 90m Ω |
| Height | 500μm |
| Length | 0m |
| Width | 0m |
| Thickness | 350μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22906YZVR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).This package is included in 4-XFBGA, DSBGA.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~85°C TA.There are 1 outputs available on this lighting driver.The LED driving board operates at Not Required volts.The maximum output voltage is P-Channel volts.Load Discharge, Slew Rate Controlled features are available on the lighting driver.The TPS22906 family contains this object.It contains 4 terminations.For operation, we use the 4 pins.The LED driver has 1 functions.In order to meet the operation criteria, the maximum output current drops to 500mA.High efficiency is possible when the supply voltage is set to 1.8V.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 4 pins.Currently, the LED driving board has a resistance of 160mOhm ohms.As a result, the output current is set to 500mA.Normal operation requires a voltage above 1V for the supply voltage.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.In total, 1 channels are available.When using this LED driving board, it is recommended that the supply voltage is set to 3.6V.Voltage input is limited to 3.6V volts.There is a minimum input voltage of 1V volts.In order to operate at its maximum capacity, the supply current must not exceed 0.00088mA.
TPS22906YZVR Features
Supplied from 1.8V
Resistance of 160mOhm
1 channels
TPS22906YZVR Applications
There are a lot of Texas Instruments TPS22906YZVR Power Switches ICs applications.
- Storage (HDDs, SSDs)
- USB Power Distribution
- Notebook and Tablet Computers
- Hard Disk Drives
- Low Voltage I/O System Power
- Portable Music Players
- Wearable Devices
- Storage Drives
- Portable GPS Device
- Smartphone and PDA
