TPS22907YZTR
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFBGA, DSBGA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 859.69mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22907 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 3.6V |
| Number of Channels | 1 |
| Interface | On/Off |
| Nominal Supply Current | 50nA |
| Output Configuration | High Side |
| Power Dissipation | 859.69mW |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Quiescent Current | 70nA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.1V |
| Max Input Voltage | 3.6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.1V~3.6V |
| Rds On (Typ) | 44m Ω |
| Height | 625μm |
| Length | 1.25mm |
| Width | 1.25mm |
| Thickness | 480μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22907YZTR Overview
Tape & Reel (TR) is how it's packaged.There is a 4-UFBGA, DSBGA package that includes it.It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum voltage of P-Channel volts is available from the output of this LED driver.This LED driving board is equipped with Slew Rate Controlled features in order for it to be useful.There is a TPS22907 family of things that it belongs to.There are 4 terminations in it.In order to operate, 4 pins are used.It has 1 functions.As a result, the maximum output current is reduced to 1A in order to meet the operation requirements.The supply voltage can be 1.2V for high efficiency.This lighting driver is mounted in the way of Surface Mount.The LED driver has a total of 4 pins.This case results in a 1A output current.We offer 1 channels in total.It is recommended to set the supply voltage to 3.6V for optimum efficiency.Its maximum input voltage is 3.6V volts.As far as input voltage goes, it has a minimum of 1.1V volts.Electrical components classified as General Purpose belong to this category.
TPS22907YZTR Features
Supplied from 1.2V
1 channels
TPS22907YZTR Applications
There are a lot of Texas Instruments TPS22907YZTR Power Switches ICs applications.
- Hard Disk Drives
- Wearable Devices
- Wireless/Networking Cards
- Hot Swap
- Solid-State Drives
- USB Power Distribution
- HDD and SSD
- Handheld Devices
- Portable Video Game Players
- Set-Top Boxes
