banner_page

TPS22908YZTR

P-Channel 0.5mm PMIC TPS22908 4 Pin 1.2V 4-UFBGA, DSBGA


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS22908YZTR
  • Package: 4-UFBGA, DSBGA
  • Datasheet: -
  • Stock: 128
  • Description: P-Channel 0.5mm PMIC TPS22908 4 Pin 1.2V 4-UFBGA, DSBGA (Kg)

Details

Tags

Parameters
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Terminal Position BOTTOM
Terminal Form BALL
Number of Functions 1
Supply Voltage 1.2V
Terminal Pitch 0.5mm
Base Part Number TPS22908
Number of Outputs 1
Output Type P-Channel
Supply Voltage-Min (Vsup) 1V
Number of Channels 1
Interface On/Off
Analog IC - Other Type SPST
Output Configuration High Side
Output Current 1A
Voltage - Supply (Vcc/Vdd) Not Required
Quiescent Current 190nA
Input Type Non-Inverting
Switch Type General Purpose
Nominal Input Voltage 3.6V
Ratio - Input:Output 1:1
Voltage - Load 1V~3.6V
Switching BREAK-BEFORE-MAKE
Rds On (Typ) 28.2m Ω
Switch-off Time-Max 7000ns
Height 625μm
Length 1.25mm
Width 1.25mm
Thickness 480μm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 4-UFBGA, DSBGA
Number of Pins 4
Operating Temperature -40°C~85°C TA
Packaging Digi-Reel®
JESD-609 Code e1
Feature Load Discharge, Slew Rate Controlled
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 4
ECCN Code EAR99
Resistance 32.1Ohm

TPS22908YZTR Overview


A Digi-Reel? is used to package it.It is included with the 4-UFBGA, DSBGA package as well.Surface Mount is the mounting type of the LED driver.It owns the General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage of this LED driver is P-Channel volts.In terms of features, the LED driving board has Load Discharge, Slew Rate Controlled.The TPS22908 family consists of this type.There are 4 terminations in it.The 4 pins are used to operate the LED driver.Currently, the lighting driver has a total of 1 functions.Using a voltage of 1.2V allows for high efficiency.It is mounted in the way of Surface Mount.It has a resistance of 32.1Ohm.The output current is set to 1A in this case.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 1V.In this case, the analog IC is SPST.A total of 1 channels are available for you to choose from.

TPS22908YZTR Features


Supplied from 1.2V
Resistance of 32.1Ohm
1 channels

TPS22908YZTR Applications


There are a lot of Texas Instruments TPS22908YZTR Power Switches ICs applications.

  • Set-top-box
  • Portable Music Players
  • Various applications equipped with buttons
  • Solid State Drivers
  • Storage Drives
  • Hot Swaps
  • Wireless/Networking Cards
  • USB Power Distribution
  • Telecom and Network Systems
  • Hot Swap

Write a review

Note: HTML is not translated!
    Bad           Good