TPS22910AYZVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-XFBGA, DSBGA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 200mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22910 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 2μA |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 10μA |
| Quiescent Current | 2μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.4V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.4V~5.5V |
| Fault Protection | Reverse Current, UVLO |
| Rds On (Typ) | 60m Ω |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| Height | 500μm |
| Length | 0m |
| Width | 0m |
| Thickness | 350μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22910AYZVR Overview
It is packaged in the manner of a Cut Tape (CT).There is a package for it in the 4-XFBGA, DSBGA package.The LED driver is mounted as Surface Mount.The switch type is General Purpose.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.As a default, the output is set to 1.The LED driving board is powered by a voltage of Not Required.It produces a maximum output voltage of P-Channel volts at its maximum output.Currently, the LED driving board is equipped with Slew Rate Controlled features.This object belongs to the TPS22910 family.As a result, there are 4 terminations.The operation is performed through the 4 pins.It consists of 1 functions.It is possible to achieve a high level of efficiency with a supply voltage of 1.5V.As a result, it is mounted in the manner of Surface Mount.The LED driving board is equipped with a total of 4 pins.In this case, there is 200mOhm resistance in the LED driving board.In this case, the output current is set to 2A.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.Voltage input is limited to 5.5V volts.There is a minimum input voltage of 1.4V volts.It requires a maximum current requirement of 10μA.
TPS22910AYZVR Features
Supplied from 1.5V
Resistance of 200mOhm
TPS22910AYZVR Applications
There are a lot of Texas Instruments TPS22910AYZVR Power Switches ICs applications.
- Portable Music Players
- Hot Swap
- Set-Top Boxes
- Notebook PC
- Mobile Communication Devices
- Hot Swaps
- Hot-Swap Systems
- Wearable Devices
- HDD, SSD
- Set-top-box
