banner_page

TPS22910AYZVT

P-Channel 0.5mm PMIC TPS22910 4 Pin 1.5V 4-XFBGA, DSBGA


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS22910AYZVT
  • Package: 4-XFBGA, DSBGA
  • Datasheet: -
  • Stock: 388
  • Description: P-Channel 0.5mm PMIC TPS22910 4 Pin 1.5V 4-XFBGA, DSBGA (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 4-XFBGA, DSBGA
Number of Pins 4
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e1
Feature Slew Rate Controlled
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 4
ECCN Code EAR99
Resistance 150mOhm
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.5V
Terminal Pitch 0.5mm
Base Part Number TPS22910
Pin Count 4
Number of Outputs 1
Output Type P-Channel
Operating Supply Voltage 5.5V
Voltage 5.5V
Interface On/Off
Current 2A
Output Configuration High Side
Output Current 2A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 10μA
Quiescent Current 2μA
Input Type Non-Inverting
Turn On Delay Time 4.5 μs
Switch Type General Purpose
Min Input Voltage 1.4V
Max Input Voltage 5.5V
Turn-Off Delay Time 16.5 μs
Ratio - Input:Output 1:1
Voltage - Load 1.4V~5.5V
Fault Protection Reverse Current, UVLO
Rds On (Typ) 60m Ω
Max Junction Temperature (Tj) 125°C
Built-in Protections TRANSIENT; UNDER VOLTAGE
Ambient Temperature Range High 85°C
Height 500μm
Length 0m
Width 0m
Thickness 350μm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS22910AYZVT Overview


It is package in Tape & Reel (TR) case.It is included in the package 4-XFBGA, DSBGA.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type that it owns.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.Operation is based on a supply voltage of Not Required.Voltage output is P-Channel volts at maximum.A lighting driver with Slew Rate Controlled features is available.It is a member of the TPS22910 family.There are 4 terminations in it.The 4 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.High efficiency is possible when the supply voltage is set to 1.5V.This lighting driver is mounted in the way of Surface Mount.There are 4 pins in total on this board.In this case, there is 150mOhm resistance in the LED driving board.This case has the output current set to 2A.In order to maximize efficiency, the supply voltage should be set to 5.5V.There is a maximum input voltage of 5.5V volts.The input voltage minimum is 1.4V volts.10μA is the maximum current required to operate it.

TPS22910AYZVT Features


Supplied from 1.5V
Resistance of 150mOhm

TPS22910AYZVT Applications


There are a lot of Texas Instruments TPS22910AYZVT Power Switches ICs applications.

  • Portable Video Game Players
  • Notebook PC
  • Smart Phones, Feature Phones
  • Wireless Headsets
  • Low Voltage I/O System Power
  • USB Power Distribution
  • Portable GPS
  • Gaming
  • Hot Swap
  • Storage Drives

Write a review

Note: HTML is not translated!
    Bad           Good