banner_page

TPS22912CYZVR

P-Channel 0.5mm PMIC TPS22912 4 Pin 1.5V 4-XFBGA, DSBGA


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS22912CYZVR
  • Package: 4-XFBGA, DSBGA
  • Datasheet: PDF
  • Stock: 335
  • Description: P-Channel 0.5mm PMIC TPS22912 4 Pin 1.5V 4-XFBGA, DSBGA (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 4-XFBGA, DSBGA
Number of Pins 4
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e1
Feature Slew Rate Controlled
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 4
ECCN Code EAR99
Resistance 80mOhm
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.5V
Terminal Pitch 0.5mm
Base Part Number TPS22912
Number of Outputs 1
Output Type P-Channel
Max Output Current 2A
Operating Supply Voltage 5.5V
Voltage 5.5V
Interface On/Off
Current 2A
Output Configuration High Side
Output Current 2A
Voltage - Supply (Vcc/Vdd) Not Required
Quiescent Current 2μA
Input Type Non-Inverting
Turn On Delay Time 840 μs
Switch Type General Purpose
Min Input Voltage 1.4V
Max Input Voltage 5.5V
Turn-Off Delay Time 6.6 μs
Ratio - Input:Output 1:1
Voltage - Load 1.4V~5.5V
Fault Protection Reverse Current, UVLO
Rds On (Typ) 60m Ω
Built-in Protections TRANSIENT; UNDER VOLTAGE
Height 500μm
Length 0m
Width 0m
Thickness 350μm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS22912CYZVR Overview


It is packaged in the form of a Tape & Reel (TR).In the 4-XFBGA, DSBGA package, it is included.This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.In this LED driver, there are no outputs available.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of P-Channel volts.A lighting driver with Slew Rate Controlled features is available.It belongs to the family TPS22912.It consists of 4 terminations in total.For operation, we use the 4 pins.It contains 1 functions.The maximum output current must drop to 2A to meet the operation criteria.Supply voltages of 1.5V allow for high efficiency.The LED driving board is mounted in the way of Surface Mount.80mOhm is the resistance of the lighting driver.As a result, the output current is set to 2A.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.This LED driver can handle voltages up to 5.5V volts.Input voltage must be at least 1.4V volts.

TPS22912CYZVR Features


Supplied from 1.5V
Resistance of 80mOhm

TPS22912CYZVR Applications


There are a lot of Texas Instruments TPS22912CYZVR Power Switches ICs applications.

  • USB Ports/Hubs
  • Portable/Handheld Devices
  • Storage (HDDs, SSDs)
  • USB Protection
  • USB Power Distribution
  • Set-top-box
  • Storage Drives
  • Wireless Modem Data Cards
  • Hot Swaps
  • Hot Swap

Write a review

Note: HTML is not translated!
    Bad           Good