TPS22913BYZVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-XFBGA, DSBGA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Peripheral Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22913 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 2A |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 10μA |
| Quiescent Current | 2μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 234 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.4V |
| Max Input Voltage | 5.5V |
| Output Characteristics | OPEN-DRAIN |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 17 μs |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 1.4V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Reverse Current, UVLO |
| Rds On (Typ) | 60m Ω |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| Height | 500μm |
| Length | 0m |
| Width | 0m |
| Thickness | 350μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22913BYZVT Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It's included in the 4-XFBGA, DSBGA package.The mounting type of the LED driver is Surface Mount.It owns General Purpose switch type.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.There are 1 outputs available on this lighting driver.A voltage of Not Required is used to power it.A maximum output voltage of P-Channel volts has been specified.In terms of features, the LED driving board has Load Discharge, Slew Rate Controlled.It comes under the family of TPS22913.There are 4 terminations in it.The operation is carried out using the 4 pins.Currently, the lighting driver has a total of 1 functions.It is possible to obtain high efficiency with a supply voltage of 1.5V.Surface Mount is mounted in the way.4 pins are equipped with it.Lighting drivers with 120mOhm resistance are used.In this case, the output current will be set to 2A.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.It has a maximum input voltage of 5.5V volts.The input voltage minimum is 1.4V volts.For its operation, a current of 10μA is required.
TPS22913BYZVT Features
Supplied from 1.5V
Resistance of 120mOhm
TPS22913BYZVT Applications
There are a lot of Texas Instruments TPS22913BYZVT Power Switches ICs applications.
- Portable Music Players
- Portable/Handheld Devices
- PC Cards
- Notebook and Tablet Computers
- Smart Phones, Feature Phones
- Wearable Devices
- Storage Drives
- USB Power Distribution
- Various applications equipped with buttons
- Wireless/Networking Cards
