TPS22913CYZVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-XFBGA, DSBGA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Peripheral Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22913 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Quiescent Current | 2μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 1.4V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Reverse Current, UVLO |
| Rds On (Typ) | 60m Ω |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| Height | 500μm |
| Length | 0m |
| Width | 0m |
| Thickness | 350μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22913CYZVT Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included in the package 4-XFBGA, DSBGA.The lighting driver is mounted in the Surface Mount position.It owns General Purpose switch type.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.In this LED driver, there are no outputs available.To operate, it needs a supply voltage of Not Required.The maximum output voltage of this LED driver is P-Channel volts.A lighting driver with Load Discharge, Slew Rate Controlled features is available.It comes under the family of TPS22913.It has a total of 4 terminations.In order to operate, 4 pins are used.The LED driver has 1 functions.The supply voltage of 1.5V is conducive to high efficiency.The lighting driver is mounted in the way of Surface Mount.A total of 4 pins are included in this LED driver.This results in a 2A output current.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).
TPS22913CYZVT Features
Supplied from 1.5V
TPS22913CYZVT Applications
There are a lot of Texas Instruments TPS22913CYZVT Power Switches ICs applications.
- PC Card Hot Swap
- Wireless Headsets
- Solid State Drivers
- Portable GPS
- Notebook PC
- USB3.1 Power Delivery
- Set-top-box
- Notebook and Tablet Computers
- Wearable Devices
- USB Protection
