TPS22914CYFPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 4-XFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS22914 |
| Number of Outputs | 1 |
| Output Voltage | 5.5mV |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.3 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 2 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.05V~5.5V |
| Rds On (Typ) | 37m Ω |
| Max Junction Temperature (Tj) | 125°C |
| Built-in Protections | TRANSIENT |
| Ambient Temperature Range High | 105°C |
| On-State Resistance | 37mOhm |
| Height | 500μm |
| Length | 0m |
| Width | 0m |
| Thickness | 0m |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22914CYFPR Overview
The package is in the form of a Tape & Reel (TR).It is included with the 4-XFBGA, DSBGA package as well.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type that it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver has 1 outputs.The LED driving board operates with a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.As far as features are concerned, the LED driving board has Slew Rate Controlled.It is a member of the TPS22914 family.The termination count is 4.In order to operate, the 4 pins are used.As far as the lighting driver is concerned, there are 1 functions.It is necessary to reduce the maximum output current to 2A to meet the operation criteria.Using a voltage of 1.2V allows for high efficiency.In this case, the output current will be set to 2A.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).
TPS22914CYFPR Features
Supplied from 1.2V
TPS22914CYFPR Applications
There are a lot of Texas Instruments TPS22914CYFPR Power Switches ICs applications.
- Gaming
- Wireless/Networking Cards
- USB Ports/Hubs
- Wireless Modem Data Cards
- USB Power Distribution
- USB Protection
- Wireless Headsets
- Smart Phones, Feature Phones
- USB3.1 Power Delivery
- Storage (HDDs, SSDs)
